Home >> Internet Games >> Wii Games

How to Install a Wii MOD-CHIP

A MOD-CHIP is a small device that a user may install into certain video game consoles to change their functionality or alter the way they read and store data. A MOD-CHIP is most often used to permit users to play backup copies of games, although some also permit users to adjust the Wii operating system itself, adding skins and other functions to the console.

Things You'll Need

MOD-CHIP
Nintendo Wii
Soldering Iron
Solder

Instructions

- 1
  Create a clean, dry, well-lit work environment where you plan to install the Wii MOD-CHIP. Lay down newspaper and ensure that there are no metal points that could inadvertently come into contact with the Wii (a spark could fry the Wii's motherboard).
- 2
  Unscrew the battery housing and set it aside.
- 3
  Unscrew the entire back panel of the Wii console.
- 4
  Use a tri-wing screwdriver to remove the screws from the front, as well as the sides and back of the Wii. This will completely disconnect the motherboard and internal components from the chassis.
- 5
  Unscrew the shield that covers the optical drive and internal components.
- 6
  Unfold the optical drive up and away from the main housing face so you can see the board underneath.
- 7
  Install the Wii MOD-CHIP in the upper right corner using the solder at the appropriate contacts. Which contacts are required will vary by MOD-CHIP, so be sure to read the instructions carefully and visually inspect the locations of the connectors on the chip.
- 8
  Reassemble your Wii and replace all screws in their original positions. Power on your Wii and check that the MOD-CHIP is working correctly.

Wii Games