Home >> Internet Games >> Xbox 360

How to Install an XCM Max Core Cooler

The XCM Max core cooler is a fan that helps cool the inside of an Xbox 360 to prevent it from overheating. The fan is installed inside of the console to provide a constant cooling breeze as it improves the effectiveness of the airflow. The fan is designed specifically for the Xbox 360 and fits neatly inside the console. No special tools are required for installation; all you need is a screwdriver to remove the Xbox 360 casing.

Things You'll Need

Screwdriver

Instructions

- 1
  Remove the screws holding the Xbox 360 casing together. When the console is upright, remove the right side of the casing.
- 2
  Position the console so the open side faces up.
- 3
  Remove the sticker cover from the sponge included with the fan kit. This will expose the sticky surface of the sponge.
- 4
  Locate the two yellow nodes surrounding an orange node. Position the sponge, sticky side down, between the yellow and white nodes located next to the orange coil.
- 5
  Disconnect the power cord from the rear of the Xbox 360 disc drive and connect it to the open end of the fan power supply cord. Connect the fan power supply cord to the rear of the Xbox 360 disc drive.
- 6
  Remove the sticker cover from the fan.
- 7
  Position the fan behind the power button, align the notches in the fan with the pegs in the Xbox 360 and push the fan into place.
- 8
  Run the power cord between the disc drive and the large white portion of casing to hide the wires.
- 9
  Replace the casing.

Xbox 360