Home >> Internet Games >> Xbox 360

How to Use a 360 Case Tool

Microsoft Xbox 360 consoles utilize a unique case to hold the console's motherboard and disc drive. The case requires a precise metal tool to put pressure on interlocking tabs that can be released to open the console. There is a tool available on the Internet that can open your Xbox 360 without the use of paperclips or other make-shift tools. The Xbox 360 Case Tool can open your console in about 15 minutes.

Things You'll Need

Xbox 360
Xbox 360 case tool
Torx screwdriver (size 10)

Instructions

- 1
  Unplug all cables and accessories from the console. Remove the plastic faceplate from the front of the machine by pulling it firmly outward. Push the rubber feet off the console using the long end of the 360 case tool and slide the end into the holes. Pry the gray plastic sides of the console off.
- 2
  Use the long side of the 360 case tool that use several "teeth" or ridges to open the rear of the console. You can insert the long side of the tool so the ridges line up along the rear of the console and fit exactly in to the plastic tabs on the back of the 360. Pry open the tabs and the clam-shell plastic case will pop off the Xbox 360.
- 3
  Use a Torx size 10 screwdriver to remove the metal screws on the interior metal casing of the console. Slide open the metal cover and you will be able to access the console's motherboard and DVD drive. Be sure to return all screws, cases, and plugs to their original positions before using the Xbox 360 again.

Xbox 360