Home >> Internet Games >> Xbox 360

How to repair a broken Rock Band kick pedal

Rock Band is a blast to play with friends and family. There's nothing better than breaking out the guitars, microphone and drums. But if you've been rocking out too hard on your Rock Band drum set, don't worry, with a little Gorilla Glue and Gorilla Tape you can fix the problem. All you need to do is glue the swivel point and the foot part of the kick pedal back together and tape your kick pedal up, and you'll be back on the road.

Things You'll Need

Gorilla Glue
Gorilla Tape

Instructions

- 1
  Cut off a 12-inch piece of Gorilla Tape and five 6-inch pieces of Gorilla Tape.
- 2
  Apply Gorilla Glue to the points on the swivel piece and the foot piece where the kick pedal broke.
- 3
  Press the pieces together.
- 4
  Quickly take one end of the 12-inch piece of Gorilla Tape and run it between the swivel point and the base of the kick pedal. Press that end of tape up against the spring on the bottom of the foot part of the kick pedal.
- 5
  Pull the tape tight around the swivel point and press it along the foot part of the pedal until the tape runs out.
- 6
  Wrap the five 6-inch pieces of Gorilla Tape around the foot part of the pedal, starting at the bottom and working about halfway up the foot pedal. Overlap the pieces until you run out of tape.
- 7
  Leave the kick pedal alone for at least one day before hooking back into your Rock Band drum set and continuing to play.

Xbox 360