Home >> Internet Games >> Xbox 360

How to Fix an XBox 360 Headset

Modern video game controllers, like the controllers for the Xbox 360 video game console, come equipped with ports designed for various add-ons. One add-on that connects to a port in the bottom of the 360 controller is a headset. This allows you to communicate with co-players during communication-enabled multiplayer games. If the headset on your Xbox 360 has become damaged or broken, there is actually a way to fix it yourself. It does require a little knowledge of electronics, but the process is fairly straightforward.

Things You'll Need

Small Phillips screwdriver
Soldering iron

Instructions

- 1
  Remove the headset from the controller and place it on a sturdy work surface such as a desk or table.
- 2
  Use your fingers to remove the foam protector pad from the earpiece. It should come off with little effort.
- 3
  Locate the three square retaining tabs on the front of the earpiece. Use the tip of your screwdriver to press each of them in.
- 4
  Pull the speaker assembly out of the earpiece and examine the internal wires for a broken connection.
- 5
  Place any broken wires back on the connection terminal on the rear of the speaker assembly and use your soldering iron to solder it back in place.
- 6
  Wait about five minutes for the solder to cool and then replace the speaker assembly in the earpiece. Your headset should now be working perfectly.

Xbox 360