Home >> Internet Games >> Xbox 360

How to Make a Turbo Charger for a Controller for an Xbox

If you've ever played a shooting game on your Xbox 360 chances are you've probably wanted to modify the trigger in order to fire your weapon more easily. There is a way to open up your controller and rig the trigger button so that it doesn't need to be completely depressed in order to fire. Once this modification is complete, you can turbo fire when the trigger is pulled. The best part is that the whole process only takes less than a few minutes.

Things You'll Need

Phillips screwdriver
Paperclip
Tape

Instructions

- 1
  Flip your Xbox controller over and remove the six exposed screws on the back of the controller.
- 2
  Remove the Xbox label sticker located in the center of the back of the controller to expose a seventh screw. Remove this screw.
- 3
  Separate the back half of the controller from the front half and set the back half aside. Then locate the right trigger button in the top of the controller housing.
- 4
  Stick the end of a paperclip in the small hole located just under the right trigger. Tape the paperclip to secure it to the trigger.
- 5
  Replace the back half of the controller and the screws. The trigger will now be modified for turbo use.

Xbox 360