Things You'll Need
Instructions
Play and Charge Kit
Insert your rechargeable battery pack into your wireless Xbox 360 controller. The battery bay is located on the bottom of the controller. Slide the battery pack in then push it down until it snaps into place.
Connect the controller plug-in of your Play and Charge cable into the port on the top of your controller.
Plug the other end of your Play and Charge cable into a USB controller port on your console.
Turn on the console. The wireless battery pack will recharge while your Xbox 360 is turned on and connected via Play and Charge cable to the controller. The battery is fully charged when the light on the charger turns from red to green.
Quick Charge Kit
Remove the battery pack from the wireless controller by pressing the eject button and pulling it out.
Insert the battery pack into the Quick Charge Kit by sliding it into one of the two charging slots then pushing it down.
Plug the Quick Charge Kit's power cable into a wall outlet. The battery is fully charged when the light on the charger turns from red to green.